ModelWaste counters can be resetWaste counters can be readedFirmware can be changedCartridges can be disabledFirmware for fixing recovery mode must be enabled in the settings.Additional information
SX435WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SW02CA 02/10/2012 in service mode.
Change firmware to SW10IA 10/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
PX-M650ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
C60Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
ET-2610Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
E-500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Color 760Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
C58Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
Photo 825Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
PM-A950Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX630Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX620FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to KA10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
Color 860Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
L6160Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LT01H9 01/09/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
Color 1160Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
TX121Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
PM215Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-620/621/625Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to YE28E8 28/08/2014 in service mode.
SX600FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to TX600.
Change printer model name to SX600.
Change printer model name to BX600.
Change printer model name to WF600.
Change printer model name to ME700.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MA0199 01/09/2009 in service mode.
Color 1150Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
Photo 820URead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
WF-C5210Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
XP-322/323/325Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to UJ03EA 03/10/2014 in service mode.
Change firmware to UJ02I3 02/03/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
ET-8700Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Photo 830URead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
PM210Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Artisan 800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR800.
Change printer model name to TX800.
Change printer model name to PX800.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MW28AC 28/12/2010 in service mode.
L3111Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-4011Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4011.
Change printer model name to WP-4015.
Change printer model name to WP-4020.
Change printer model name to WP-4025.
Change firmware to HA17E2 17/02/2014 in normal mode.
Change firmware to HA05G2 05/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
Photo 785Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
L362Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RM07EA 07/10/2014 in service mode.
Change firmware to RD12F3 12/03/2015 in service mode.
PM280Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Photo 890Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
Photo 895Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
WF-2010/2011Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
E-520Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX200/TX205/TX209Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX200.
Change printer model name to TX200.
Change printer model name to SX200.
Change firmware to ER1382 13/02/2008 in service mode.
BX535WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX530.
Change printer model name to NX635.
Change printer model name to SX535.
Change printer model name to BX535.
Change firmware to WR12B9 12/09/2011 in service mode.
CX4500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Photo 900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
PX-A740Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
CX4000Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Photo 915Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
ME-30Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C47Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
Photo 935Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
SX430WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SW02CA 02/10/2012 in service mode.
Change firmware to SW10IA 10/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
Photo 925Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
Photo 950Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
WP-4532Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
PX-G5000Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PF-81Change firmware to SX24I1 24/01/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-211/214/216Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OD13D2 13/02/2013 in service mode.
Change firmware to OD04EC 04/12/2014 in service mode.
Change firmware to OD13D2 13/02/2013 in normal mode.
Change firmware to OD04EC 04/12/2014 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PM-3500CRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
PX-M740FRead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to CC30FA 30/10/2015 in service mode.
Change firmware to CC20GC 20/12/2016 with disabled ink cartridges in service mode.
C78Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
L301Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SS23C7 23/07/2012 in service mode.
Photo 960Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read/Write printer EEPROM settings.
PX-B750FRead printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
E-600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-603FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to KA10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
Photo 1280Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
PMRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printer EEPROM settings.
Photo 1290Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
Photo 1390Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AR1273 12/03/2007 in service mode.
TX110Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM250Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM240Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Photo 1400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AR1273 12/03/2007 in service mode.
WP-4020Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4011.
Change printer model name to WP-4015.
Change printer model name to WP-4020.
Change printer model name to WP-4025.
Change firmware to HA17E2 17/02/2014 in normal mode.
Change firmware to HA05G2 05/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-510Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to NE09D9 09/09/2013 in service mode.
B300Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set AID mode (A).
Set AID mode (B).
Set AID mode OFF.
Photo 1410Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AR1273 12/03/2007 in service mode.
WorkForce 620/625Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
E-330Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-S5040Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to AS01E8 01/08/2014 in service mode.
Change firmware to AS30FA 30/10/2015 with disabled ink cartridges in service mode.
Change firmware to AS30FA 30/10/2015 with disabled ink cartridges in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L475Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BM25G2 25/02/2016 in service mode.
Change firmware to BM20G4 20/04/2016 in service mode.
Photo 2100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX2900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
C82Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
ME Office 570Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SW02CA 02/10/2012 in service mode.
Change firmware to SW10IA 10/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
C48Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C42Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
BX300FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L365Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RD12F3 12/03/2015 in service mode.
C41Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
Photo 2200Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-G4500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AR1273 12/03/2007 in service mode.
PM-4000PXRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX560/RX565Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
C43Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
SC-PX5VIIRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AT23F3 23/03/2015 in service mode.
Change firmware to AT26FB 26/11/2015 in service mode.
Change firmware to AT12GC 12/12/2016 with disabled ink cartridges in service mode.
Change firmware to AT11HC 11/12/2017 for fixing recovery problems in service mode.
Change firmware to AT12GC 12/12/2016 with disabled ink cartridges in normal mode.
Change firmware to AT23F3 23/03/2015 in normal mode.
Change firmware to AT26FB 26/11/2015 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WP-4540Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to GT22D3 22/03/2013 in service mode.
L6190Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LT01H9 01/09/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PM200Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
C63Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WP-M4525Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-4725Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
PM225Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-A900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
C45Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
TX235Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX230.
Change printer model name to TX230.
Change printer model name to TX235.
Change printer model name to SX235.
Set localization settings to WEST.
Set localization settings to EURO.
Change firmware to FM02CA 02/10/2012 in service mode.
PX820FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BW04AA 04/10/2010 in service mode.
PM235Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM245Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Photo 1430Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR-1430.
Change printer model name to SP-1430.
Change printer model name to SP-1500.
Change printer model name to SP-1530.
Change printer model name to EP-4004.
Change firmware to AO18C5 18/05/2012 in service mode.
Change firmware to AO25G2 25/02/2016 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
PX-G5300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM260Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
D88Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
M205Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to MY19I1 19/01/2018 for fixing recovery problems in service mode.
Change firmware to MY30D1 30/01/2013 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PM290Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
PX-204Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
PM270Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM310Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX-045.
Change printer model name to XP-100.
Change firmware to RT07C6 07/06/2012 in service mode.
Change firmware to RT07C6 07/06/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PM400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
G4000 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
WF-6093Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset Paper Feed Counter.
Change firmware to DG15G4 15/04/2016 in normal mode.
Change firmware to DG31GA 31/10/2016 with disabled ink cartridges in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
NX400/NX405/NX409Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX400.
Change printer model name to TX400.
Change printer model name to SX400.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
E-300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L375Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BD25G2 25/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
E-350Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX135Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
BX525WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-7520Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-7510.
Change printer model name to WP-7515.
Change printer model name to WP-7511.
Change printer model name to WP-7520.
Change printer model name to WP-7525.
Change printer model name to WP-7521.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to MM10D9 10/09/2013 in service mode.
Change firmware to MM14E2 14/02/2014 in service mode.
E-360Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
E-700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R210Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX4700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L3116Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
C44Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WP-4545Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to GT22D3 22/03/2013 in service mode.
C46Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
XP-810Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to NX02D9 02/09/2013 in service mode.
PX-504ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX530.
Change printer model name to NX635.
Change printer model name to SX535.
Change printer model name to BX535.
Change firmware to WR12B9 12/09/2011 in service mode.
C59Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WP-4533Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
PX-S160TChange firmware to MR19I1 19/01/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
C62Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
CX3300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
EP-774ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AU16E1 16/01/2014 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-352/355Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
EP-30VAChange firmware to NB17I1 17/01/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
C61Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
EP-906FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NF15G6 15/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-2750/2751Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to EURO.
Set localization settings to WEST.
Change firmware to JP24G5 24/05/2016 in service mode.
Change firmware to JP29G6 29/06/2016 in service mode.
Change firmware to JP24G5 24/05/2016 with disabled ink cartridges in service mode.
Change firmware to JP02I2 02/02/2018 for fixing recovery problems in service mode.
Change firmware to JP24G5 24/05/2016 in normal mode.
Change firmware to JP29G6 29/06/2016 in normal mode.
Change firmware to JP24G5 24/05/2016 with disabled ink cartridges in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
TX103Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
C64Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
MG5500 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
C65Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C77Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C66Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C67Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
TX830FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR-837.
Change printer model name to EP-904.
Change printer model name to PX-830.
Reset scan counter.
Reset page counter.
Change firmware to WB27BB 27/11/2011 in service mode.
C68Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WF-2630/2631Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to LF08G3 08/03/2016 in service mode.
Change firmware to LF26I1 26/01/2018 for fixing recovery problems in service mode.
Change firmware to LF08G3 08/03/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
C70Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WP-4010Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4011.
Change printer model name to WP-4015.
Change printer model name to WP-4020.
Change printer model name to WP-4025.
Change firmware to HA17E2 17/02/2014 in normal mode.
Change firmware to HA05G2 05/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PX-A640Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
EP-978A3Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to PL18G3 18/03/2016 in service mode.
Change firmware to PL14G6 14/06/2016 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
T23Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Artisan 837Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR-837.
Change printer model name to EP-904.
Change printer model name to PX-830.
Reset scan counter.
Reset page counter.
Change firmware to WB27BB 27/11/2011 in service mode.
C79Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C80Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WP-4015Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4011.
Change printer model name to WP-4015.
Change printer model name to WP-4020.
Change printer model name to WP-4025.
Change firmware to HA17E2 17/02/2014 in normal mode.
Change firmware to HA05G2 05/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
T60Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Additional tests.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 50.
Change printer model name to EP-302.
Change printer model name to P50.
Change printer model name to T50.
Change printer model name to T60.
WorkForce 520/525Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
Change firmware to GL19A4 19/04/2010 in normal mode.
Change firmware to GL04A6 04/06/2010 in normal mode.
Change firmware to GL11C5 11/05/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-412/413/415Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to EM13D4 13/04/2013 in service mode.
Change firmware to EM26I6 26/06/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
C83Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
D68Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C84Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C85Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C86Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
L485Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FJ04H8 04/08/2017 in service mode.
C87Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
L3151Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SS23C7 23/07/2012 in service mode.
C88Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
C90Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printer EEPROM settings.
XP-55Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NS08E8 08/08/2014 in service mode.
XP-801Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to MB09D5 09/05/2013 in service mode.
Change firmware to MB28E8 28/08/2014 in service mode.
Change firmware to MB22G4 22/04/2016 in service mode.
C91Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printer EEPROM settings.
PX-605FRead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change printer model name to WP-3520/3521.
Change printer model name to WP-3530/3531.
Reset the platen pad counter.
Change firmware to CG29CA 29/10/2012 in service mode.
C92Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printer EEPROM settings.
D78Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
D92Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printer EEPROM settings.
C110Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX3200Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
WorkForce 40Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
EP-905ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MG09D5 09/05/2013 in service mode.
C120Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R3000Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AS27B4 27/04/2011 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-5113Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GS09GC 09/12/2016 in service mode.
Change firmware to GS09GC 09/12/2016 with disabled ink cartridges in service mode.
D120Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX5900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-V600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
XP-205/207Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RF10D4 10/04/2013 in service mode.
Change firmware to RF01G4 01/04/2016 in service mode.
Change firmware to RF10D4 10/04/2013 in normal mode.
Change firmware to RF01G4 01/04/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PX-7VRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FR24F7 24/07/2015 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PX-V630Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
XP-30/33Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to VO04C4 04/04/2012 in service mode.
PX-V780Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-243/245/247Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to EF02GC 02/12/2016 with disabled ink cartridges in service mode.
CX2800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX3100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
CX3400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
DX5000/DX5050Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX3500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
T13Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-410Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OM01D2 01/02/2013 in service mode.
Change firmware to OM28G1 28/01/2016 in service mode.
Change firmware to OM26I6 26/06/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WP-4530Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
EP-804ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to JS22G4 22/04/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
ME-85Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
CX3600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R330/R335Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-1004Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX320FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AN28B2 28/02/2011 in service mode.
Change firmware to AT05C6 05/06/2012 in service mode.
CX3700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX3800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME-300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ET-2650Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RX14I9 14/09/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
CX3900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L566Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RF22IB 22/11/2018 for fixing recovery problems in service mode.
Change firmware to RF31F3 31/03/2015 in normal mode.
Change firmware to RF23G2 23/02/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
CX4100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-630/631/635Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NQ10F8 10/08/2015 in service mode.
Change firmware to NQ18G3 18/03/2016 in service mode.
Change firmware to NQ14G6 14/06/2016 in service mode.
Change firmware to NQ08I5 08/05/2018 for fixing recovery problems in service mode.
Change firmware to NQ10F8 10/08/2015 in normal mode.
Change firmware to NQ18G3 18/03/2016 in normal mode.
Change firmware to NQ14G6 14/06/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-300/301Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RJ08C8 08/08/2012 in service mode.
Change firmware to RJ01G4 01/04/2016 in service mode.
CX4200Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
BX620FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to KA10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
T12Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX4600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-310Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OJ15D4 15/04/2013 in service mode.
M1128Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX4800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WorkForce 320/325Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AN28B2 28/02/2011 in service mode.
Change firmware to AT05C6 05/06/2012 in service mode.
CX4900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L210Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SM23C7 23/07/2012 in service mode.
CX5000Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX6000Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX530Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX6300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
XP-960Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to PL18G3 18/03/2016 in service mode.
Change firmware to PL14G6 14/06/2016 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
CX6400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
CX6500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
CX6600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer EEPROM settings.
PM-A820Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX7300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX700WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to HP02A3 02/03/2010 in service mode.
Change firmware to HP20C1 20/01/2012 in service mode.
WF-7011Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-7010.
Change printer model name to WP-7011.
Change printer model name to WP-7012.
Change printer model name to WP-7015.
Change printer model name to WP-7018.
Change firmware to MS22D3 22/03/2013 in service mode.
Change firmware to MS24D9 24/09/2013 in service mode.
Change firmware to MS19G2 19/02/2016 in service mode.
Change firmware to MS22D3 22/03/2013 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
CX7400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-720Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to YD26E9 26/09/2014 in service mode.
Change firmware to YD07F8 07/08/2015 in service mode.
NX430Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX430.
Change printer model name to SX440.
Change printer model name to TX435.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to ST01D4 01/04/2013 in service mode.
Change firmware to ST04G3 04/03/2016 in service mode.
L3156Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-230/231Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FO01G3 01/03/2016 in service mode.
CX7700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX400/TX405/TX409Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX400.
Change printer model name to TX400.
Change printer model name to SX400.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
R265Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX7800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX8300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-4091Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
EP-902FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
CX8400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX9300FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
CX9400FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX525FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
Change firmware to GL19A4 19/04/2010 in normal mode.
Change firmware to GL04A6 04/06/2010 in normal mode.
Change firmware to GL11C5 11/05/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
DX3800/DX3850Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX560WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-3520/3521Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change printer model name to WP-3520/3521.
Change printer model name to WP-3530/3531.
Reset the platen pad counter.
Change firmware to CG29CA 29/10/2012 in service mode.
DX4000/DX4050Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX550Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ET-4500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BF20G4 20/04/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
DX4200/DX4250Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R220Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX620Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
DX4800/DX4850Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
DX6000/DX6050Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME Office 1100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX1001.
Change printer model name to WF1100.
Change printer model name to ME1100.
Change printer model name to B1100.
Change printer model name to T1100.
Change printer model name to T1110.
DX7400/DX7450Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
DX8400/DX8450Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
DX9400FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R200Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Artisan 710Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME Office 82WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R230Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
EP-10VARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to PH17I1 17/01/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
R240/R245Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R250Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R260Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-710Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to NX02D9 02/09/2013 in service mode.
TX610FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
R270Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX200/SX205/SX209Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX200.
Change printer model name to TX200.
Change printer model name to SX200.
Change firmware to ER1382 13/02/2008 in service mode.
R280Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-7610Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to EURO.
Set localization settings to ASIA.
Set localization settings to WEST.
Reset the platen pad counter.
Change firmware to AD22E4 22/04/2014 in service mode.
Change firmware to AD01E8 01/08/2014 in service mode.
Change firmware to AD26F5 26/05/2015 in service mode.
Change firmware to AD10G2 10/02/2016 in service mode.
Change firmware to AD24G6 24/06/2016 in service mode.
Change firmware to AD21G7 21/07/2016 with disabled ink cartridges in service mode.
Change firmware to AD09I2 09/02/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
R285Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX235WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX230.
Change printer model name to TX230.
Change printer model name to TX235.
Change printer model name to SX235.
Set localization settings to WEST.
Set localization settings to EURO.
Change firmware to FM02CA 02/10/2012 in service mode.
EP-808ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to ND02I3 02/03/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
RX500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
S21Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R290/R295Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ET-2500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BD25G2 25/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
EP-705ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Change firmware to OR13C4 13/04/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WP-4535Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
R300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printer EEPROM settings.
L6191Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LT01H9 01/09/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-702Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to MB09D5 09/05/2013 in service mode.
Change firmware to MB28E8 28/08/2014 in service mode.
Change firmware to MB22G4 22/04/2016 in service mode.
R310Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R320Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
NX510/NX515Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
NX620Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L350Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SM23C7 23/07/2012 in service mode.
WF-M5190Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
R330Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-340Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to MJ10H8 10/08/2017 in service mode.
Change firmware to MJ10H8 10/08/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
R340Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R350Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WorkForce 840Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to CS10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
M105Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FY10CC 10/12/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-440/441Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SO10H8 10/08/2017 in service mode.
Change firmware to SO21HB 21/11/2017 in service mode.
Change firmware to SO10H8 10/08/2017 in normal mode.
Change firmware to SO21HB 21/11/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PX-M5080FRead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to FA27HC 27/12/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
R360Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R380Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SC-P407Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FA06FB 06/11/2015 in service mode.
Change firmware to FA14HC 14/12/2017 in service mode.
Change firmware to FA05GC 05/12/2016 with disabled ink cartridges in service mode.
Change firmware to FA05GC 05/10/2016 with disabled ink cartridges in normal mode.
Change firmware to FA06FB 06/10/2015 in normal mode.
Change firmware to FA14HC 14/12/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
R390Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-G850Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX600FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to TX600.
Change printer model name to SX600.
Change printer model name to BX600.
Change printer model name to WF600.
Change printer model name to ME700.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MA0199 01/09/2009 in service mode.
PM-G860Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX420/RX425Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-D770Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-D800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-850Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MG09D5 09/05/2013 in service mode.
PM-D870Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-A720Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R1800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L3108Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R1900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME Office 700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to TX600.
Change printer model name to SX600.
Change printer model name to BX600.
Change printer model name to WF600.
Change printer model name to ME700.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MA0199 01/09/2009 in service mode.
WP-4515Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
R2000Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FR24F7 24/07/2015 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
T27Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R2400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Additional tests.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
R2880Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-312/313/315Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to EJ18D4 18/04/2013 in service mode.
XP-202/203/206Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RD04C4 04/04/2012 in service mode.
Change firmware to RD13CC 13/12/2012 in service mode.
Change firmware to RD04C4 04/04/2012 in normal mode.
Change firmware to RD13CC 13/12/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
EP-880A[X]Change firmware to MN28I2 28/02/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L6171Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LT01H9 01/09/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L200Reset printer ink levels.
Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-5VRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AS27B4 27/04/2011 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
ME-400Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-G5100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX430Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX510Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Artisan 700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to HP02A3 02/03/2010 in service mode.
Change firmware to HP20C1 20/01/2012 in service mode.
RX520Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX117Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX580Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
K101Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX585Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX590Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX595Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to PK11J1 11/01/2019 for fixing recovery problems in service mode.
Change firmware to PK09G9 09/09/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
RX600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-4531Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
RX610/RX615Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-2865Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LQ17iA 17/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WF-M5298Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
WP-4525Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
L312Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX640Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX650Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-446Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SO10H8 10/08/2017 in service mode.
Change firmware to SO21HB 21/11/2017 in service mode.
Change firmware to SO10H8 10/08/2017 in normal mode.
Change firmware to SO21HB 21/11/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-520Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to YF28E8 28/08/2014 in service mode.
Change firmware to YF07F8 07/08/2015 in service mode.
RX680Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
EP-803ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Change firmware to AJ03G6 03/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
RX685Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
RX690Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
T26Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-M4015Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-A840Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-A840SRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L7180Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
PM-A870Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WorkForce 435Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AN28B2 28/02/2011 in service mode.
Change firmware to AT05C6 05/06/2012 in service mode.
PX-1001Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX1001.
Change printer model name to WF1100.
Change printer model name to ME1100.
Change printer model name to B1100.
Change printer model name to T1100.
Change printer model name to T1110.
ET-4750Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LT01H9 01/09/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
B1100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX1001.
Change printer model name to WF1100.
Change printer model name to ME1100.
Change printer model name to B1100.
Change printer model name to T1100.
Change printer model name to T1110.
PM-A890Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-A940Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-1600FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-7510.
Change printer model name to WP-7515.
Change printer model name to WP-7511.
Change printer model name to WP-7520.
Change printer model name to WP-7525.
Change printer model name to WP-7521.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to MM10D9 10/09/2013 in service mode.
Change firmware to MM14E2 14/02/2014 in service mode.
BX600FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to TX600.
Change printer model name to SX600.
Change printer model name to BX600.
Change printer model name to WF600.
Change printer model name to ME700.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MA0199 01/09/2009 in service mode.
PM-A920Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer USB-ID.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
K100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PM-A970Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WF-7620Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ASIA.
Set localization settings to WEST.
Reset the platen pad counter.
Change firmware to AD22E4 22/04/2014 in service mode.
Change firmware to AD01E8 01/08/2014 in service mode.
Change firmware to AD26F5 26/05/2015 in service mode.
Change firmware to AD10G2 10/02/2016 in service mode.
Change firmware to AD24G6 24/06/2016 in service mode.
Change firmware to AD21G7 21/07/2016 with disabled ink cartridges in service mode.
Change firmware to AD09I2 09/02/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WP-4520Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
T10Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
BX925FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to CS10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
T11Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L3168Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
T20Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX650/TX659Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Additional tests.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
T50/T59Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Additional tests.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 50.
Change printer model name to EP-302.
Change printer model name to P50.
Change printer model name to T50.
Change printer model name to T60.
EP-306Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NS08E8 08/08/2014 in service mode.
S20Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
T21Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
T24Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
EP-801ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
T30Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to T-30.
Change printer model name to T-33.
Change printer model name to B-30.
Change printer model name to ME70.
Change printer model name to WF30.
BX305FW+Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AN28B2 28/02/2011 in service mode.
Change firmware to AT05C6 05/06/2012 in service mode.
T33Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to T-30.
Change printer model name to T-33.
Change printer model name to B-30.
Change printer model name to ME70.
Change printer model name to WF30.
B30Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to T-30.
Change printer model name to T-33.
Change printer model name to B-30.
Change printer model name to ME70.
Change printer model name to WF30.
T40WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
B40WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME Office 70Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to T-30.
Change printer model name to T-33.
Change printer model name to B-30.
Change printer model name to ME70.
Change printer model name to WF30.
XP-400/401Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to RM12C7 12/07/2012 in service mode.
Change firmware to RM01G4 01/04/2016 in service mode.
PX-404ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FU02CA 02/10/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
Artisan 720Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 720.
Change printer model name to Artisan 725.
Change printer model name to TX720.
Change printer model name to PX720.
Change firmware to AW04AA 04/10/2010 in service mode.
NX625Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME Office 80Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WorkForce 30Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to T-30.
Change printer model name to T-33.
Change printer model name to B-30.
Change printer model name to ME70.
Change printer model name to WF30.
WorkForce 60Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
BX305FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AN28B2 28/02/2011 in service mode.
Change firmware to AT05C6 05/06/2012 in service mode.
PX-101Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to T-30.
Change printer model name to T-33.
Change printer model name to B-30.
Change printer model name to ME70.
Change printer model name to WF30.
XP-220Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SF09G6 09/06/2016 in service mode.
PX-201Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-203Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WorkForce 845Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WF845.
Change printer model name to BX935.
Change firmware to CR29D3 29/03/2013 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
ME Office 85NDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L110Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SS23C7 23/07/2012 in service mode.
TX325FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AN28B2 28/02/2011 in service mode.
Change firmware to AT05C6 05/06/2012 in service mode.
TX720WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 720.
Change printer model name to Artisan 725.
Change printer model name to TX720.
Change printer model name to PX720.
Change firmware to AW04AA 04/10/2010 in service mode.
T42WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
B42WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WorkForce 545Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WF545.
Change printer model name to WF645.
Change printer model name to BX630.
Change printer model name to BX635.
Change printer model name to ME940.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to KR12B9 12/09/2011 in service mode.
Change firmware to KR24IA 24/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
P50Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Additional tests.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 50.
Change printer model name to EP-302.
Change printer model name to P50.
Change printer model name to T50.
Change printer model name to T60.
Artisan 50Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Additional tests.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 50.
Change printer model name to EP-302.
Change printer model name to P50.
Change printer model name to T50.
Change printer model name to T60.
EW-M660FTRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to DD16I2 16/02/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
M200Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to MY19I1 19/01/2018 for fixing recovery problems in service mode.
Change firmware to MY30D1 30/01/2013 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WP-4090Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
T1100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX1001.
Change printer model name to WF1100.
Change printer model name to ME1100.
Change printer model name to B1100.
Change printer model name to T1100.
Change printer model name to T1110.
T1110Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX1001.
Change printer model name to WF1100.
Change printer model name to ME1100.
Change printer model name to B1100.
Change printer model name to T1100.
Change printer model name to T1110.
ME-301Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-046ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OD13D2 13/02/2013 in service mode.
Change firmware to OD04EC 04/12/2014 in service mode.
Change firmware to OD13D2 13/02/2013 in normal mode.
Change firmware to OD04EC 04/12/2014 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
EP-708ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NI02I3 02/03/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-235Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FE01G3 01/03/2016 in service mode.
PX-435ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RJ08C8 08/08/2012 in service mode.
Change firmware to RJ01G4 01/04/2016 in service mode.
WorkForce 1100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX1001.
Change printer model name to WF1100.
Change printer model name to ME1100.
Change printer model name to B1100.
Change printer model name to T1100.
Change printer model name to T1110.
EP-4004Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR-1430.
Change printer model name to SP-1430.
Change printer model name to SP-1500.
Change printer model name to SP-1530.
Change printer model name to EP-4004.
Change firmware to AO18C5 18/05/2012 in service mode.
Change firmware to AO25G2 25/02/2016 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
TX235WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX230.
Change printer model name to TX230.
Change printer model name to TX235.
Change printer model name to SX235.
Set localization settings to WEST.
Set localization settings to EURO.
Change firmware to FM02CA 02/10/2012 in service mode.
XP-540Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-M4521Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Artisan 1430Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR-1430.
Change printer model name to SP-1430.
Change printer model name to SP-1500.
Change printer model name to SP-1530.
Change printer model name to EP-4004.
Change firmware to AO18C5 18/05/2012 in service mode.
Change firmware to AO25G2 25/02/2016 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
Photo 1500/1530WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR-1430.
Change printer model name to SP-1430.
Change printer model name to SP-1500.
Change printer model name to SP-1530.
Change printer model name to EP-4004.
Change firmware to AO18C5 18/05/2012 in service mode.
Change firmware to AO25G2 25/02/2016 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
NX200/NX205/SX209Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX200.
Change printer model name to TX200.
Change printer model name to SX200.
Change firmware to ER1382 13/02/2008 in service mode.
TX210/TX215/TX219Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX210/SX215/SX219Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
NX210/NX215/NX219Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX220Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX218Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-4511Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
WF-M5799Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
BX935FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WF845.
Change printer model name to BX935.
Change firmware to CR29D3 29/03/2013 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PX-602FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
NX220Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX228Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
B508DNRead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set AID mode (A).
Set AID mode (B).
Set AID mode OFF.
SX230Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FU02CA 02/10/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
TX230WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX230.
Change printer model name to TX230.
Change printer model name to TX235.
Change printer model name to SX235.
Set localization settings to WEST.
Set localization settings to EURO.
Change firmware to FM02CA 02/10/2012 in service mode.
PX810FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer EEPROM settings.
Change firmware to LW28AC 28/12/2010 in service mode.
NX230Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX230.
Change printer model name to TX230.
Change printer model name to TX235.
Change printer model name to SX235.
Set localization settings to WEST.
Set localization settings to EURO.
Change firmware to FM02CA 02/10/2012 in service mode.
TX300FRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
NX300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX400/SX405/SX409Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX400.
Change printer model name to TX400.
Change printer model name to SX400.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
TX410/TX415/TX419Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-2540/2541/2548Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to LJ18D2 18/02/2013 in service mode.
Change firmware to LJ18FC 18/12/2015 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
EW-M570TRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
TX113Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX410/SX415/SX419Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
NX410/NX415/NX419Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-215/217Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OF08D4 08/04/2013 in service mode.
Change firmware to OF08D4 08/04/2013 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
ME Office 600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L565Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RF22IB 22/11/2018 for fixing recovery problems in service mode.
Change firmware to RF31F3 31/03/2015 in normal mode.
Change firmware to RF23G2 23/02/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
TX420WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX420.
Change printer model name to SX420.
Change printer model name to TX420.
Change printer model name to SX425.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to SA04A6 04/06/2010 in service mode.
Change firmware to SA28A7 28/07/2010 in service mode.
L606Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to DX07I9 07/09/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
SX420WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX420.
Change printer model name to SX420.
Change printer model name to TX420.
Change printer model name to SX425.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to SA04A6 04/06/2010 in service mode.
Change firmware to SA28A7 28/07/2010 in service mode.
PX-M780FRead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
NX420Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX420.
Change printer model name to SX420.
Change printer model name to TX420.
Change printer model name to SX425.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to SA04A6 04/06/2010 in service mode.
Change firmware to SA28A7 28/07/2010 in service mode.
SX425WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX420.
Change printer model name to SX420.
Change printer model name to TX420.
Change printer model name to SX425.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to SA04A6 04/06/2010 in service mode.
Change firmware to SA28A7 28/07/2010 in service mode.
TX430WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SW02CA 02/10/2012 in service mode.
Change firmware to SW10IA 10/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
PX710WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L1455Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
NX330Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SW02CA 02/10/2012 in service mode.
Change firmware to SW10IA 10/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
EP-777ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
Change firmware to YB20I3 20/03/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
TX435WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX430.
Change printer model name to SX440.
Change printer model name to TX435.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to ST01D4 01/04/2013 in service mode.
Change firmware to ST04G3 04/03/2016 in service mode.
SX440W/SX445WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX430.
Change printer model name to SX440.
Change printer model name to TX435.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to ST01D4 01/04/2013 in service mode.
Change firmware to ST04G3 04/03/2016 in service mode.
TX510FNRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
G3000 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
TX515FNRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
BX310FNRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-302/303/305/306Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to UJ30C3 30/03/2012 in service mode.
Change firmware to UJ11I5 11/05/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
BX320FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
Change firmware to GL19A4 19/04/2010 in normal mode.
Change firmware to GL04A6 04/06/2010 in normal mode.
Change firmware to GL11C5 11/05/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-610/611/615Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to NA02D9 02/09/2013 in service mode.
XP-701Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to MB09D5 09/05/2013 in service mode.
Change firmware to MB28E8 28/08/2014 in service mode.
Change firmware to MB22G4 22/04/2016 in service mode.
SX535WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX530.
Change printer model name to NX635.
Change printer model name to SX535.
Change printer model name to BX535.
Change firmware to WR12B9 12/09/2011 in service mode.
NX530Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX530.
Change printer model name to NX635.
Change printer model name to SX535.
Change printer model name to BX535.
Change firmware to WR12B9 12/09/2011 in service mode.
MX470 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
L6168Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LT01H9 01/09/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
NX635Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX530.
Change printer model name to NX635.
Change printer model name to SX535.
Change printer model name to BX535.
Change firmware to WR12B9 12/09/2011 in service mode.
XP-760Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to YG20E6 20/06/2014 in service mode.
Change firmware to YG07IC 07/12/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
TX129Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
XP-332/333/335Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to JE24F8 24/08/2015 in service mode.
Change firmware to JE09IB 09/11/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
EP-706ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Change firmware to NM15G6 15/06/2016 in service mode.
SX510/SX515Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX525WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WorkForce 310Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
SX610FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
PX-M840FRead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GM22E4 22/04/2014 in service mode.
Change firmware to GM18G3 18/03/2016 in service mode.
Change firmware to GM09GC 09/12/2016 with disabled ink cartridges in service mode.
BX610FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
TX620FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to KA10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-950Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to PG02D9 02/09/2013 in service mode.
BX625FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to KA10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L3110Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
BX630FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WF545.
Change printer model name to WF645.
Change printer model name to BX630.
Change printer model name to BX635.
Change printer model name to ME940.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to KR12B9 12/09/2011 in service mode.
Change firmware to KR24IA 24/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
BX635FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WF545.
Change printer model name to WF645.
Change printer model name to BX630.
Change printer model name to BX635.
Change printer model name to ME940.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to KR12B9 12/09/2011 in service mode.
Change firmware to KR24IA 24/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
EP-807ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to YG20E6 20/06/2014 in service mode.
Change firmware to YG07IC 07/12/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
PX650/PX659Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Additional tests.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
PX660Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Additional tests.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to RH07B3 07/03/2011 in service mode.
PX700WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to HP02A3 02/03/2010 in service mode.
Change firmware to HP20C1 20/01/2012 in service mode.
TX710WRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX720WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 720.
Change printer model name to Artisan 725.
Change printer model name to TX720.
Change printer model name to PX720.
Change firmware to AW04AA 04/10/2010 in service mode.
TX730WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR730.
Change printer model name to TX730.
Change printer model name to PX730.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to WS27BB 27/11/2011 in service mode.
Change firmware to WS15I6 15/06/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
PX730WDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR730.
Change printer model name to TX730.
Change printer model name to PX730.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to WS27BB 27/11/2011 in service mode.
Change firmware to WS15I6 15/06/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
TX800FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR800.
Change printer model name to TX800.
Change printer model name to PX800.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MW28AC 28/12/2010 in service mode.
MB2000 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
MG5600 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
PX800FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR800.
Change printer model name to TX800.
Change printer model name to PX800.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MW28AC 28/12/2010 in service mode.
TX810FWRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer EEPROM settings.
Change firmware to LW28AC 28/12/2010 in service mode.
TX820FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BW04AA 04/10/2010 in service mode.
PX830FWDRead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR-837.
Change printer model name to EP-904.
Change printer model name to PX-830.
Reset scan counter.
Reset page counter.
Change firmware to WB27BB 27/11/2011 in service mode.
Artisan 810Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer EEPROM settings.
Change firmware to LW28AC 28/12/2010 in service mode.
ME Office 510Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME Office 520Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME Office 530Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FU02CA 02/10/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
ME Office 560Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to NX420.
Change printer model name to SX420.
Change printer model name to TX420.
Change printer model name to SX425.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to SA04A6 04/06/2010 in service mode.
Change firmware to SA28A7 28/07/2010 in service mode.
G3010 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
L1300Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to PR10E1 10/01/2014 in service mode.
ME Office 620Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to AN28B2 28/02/2011 in service mode.
Change firmware to AT05C6 05/06/2012 in service mode.
WP-4521Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4515.
Change printer model name to WP-4511.
Change printer model name to WP-4525.
Change printer model name to WP-4521.
Change printer model name to WP-4520.
Change printer model name to WP-4535.
Change printer model name to WP-4530.
Change printer model name to WP-4531.
Change printer model name to WP-4532.
Change printer model name to WP-4533.
Set localization settings to RU.
Set localization settings to ZH.
Set localization settings to EN.
Change firmware to GE17E2 17/02/2014 in service mode.
ME Office 650Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-C5710Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
ME Office 900Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-3010/3011Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
ME Office 940Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WF545.
Change printer model name to WF645.
Change printer model name to BX630.
Change printer model name to BX635.
Change printer model name to ME940.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to KR12B9 12/09/2011 in service mode.
Change firmware to KR24IA 24/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
ME Office 960Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to KA10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
ME-340Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
L655Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to DC20F4 20/04/2015 in service mode.
Change firmware to DC04G2 04/02/2016 in service mode.
Change firmware to DC16I2 16/02/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WorkForce 500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WP-4590Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to GP15G1 15/01/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WorkForce 600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to TX600.
Change printer model name to SX600.
Change printer model name to BX600.
Change printer model name to WF600.
Change printer model name to ME700.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MA0199 01/09/2009 in service mode.
WorkForce 610/615Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read/Write printer EEPROM settings.
WorkForce 630/635Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to KA10G6 10/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WorkForce 645Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WF545.
Change printer model name to WF645.
Change printer model name to BX630.
Change printer model name to BX635.
Change printer model name to ME940.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to KR12B9 12/09/2011 in service mode.
Change firmware to KR24IA 24/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
PF-70Change firmware to SD28H7 28/07/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
Artisan 725Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to Artisan 720.
Change printer model name to Artisan 725.
Change printer model name to TX720.
Change printer model name to PX720.
Change firmware to AW04AA 04/10/2010 in service mode.
PX-5500Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Artisan 835Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BW04AA 04/10/2010 in service mode.
Artisan 730Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to AR730.
Change printer model name to TX730.
Change printer model name to PX730.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to WS27BB 27/11/2011 in service mode.
Change firmware to WS15I6 15/06/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
Artisan 830Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BW04AA 04/10/2010 in service mode.
XP-20Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-2760/2761Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to LP24G5 24/05/2016 in service mode.
Change firmware to LP24G5 24/05/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
SC-P800Read printer status and ink levels.
Change firmware to OR20I4 20/04/2018 for fixing recovery problems in service mode.
Change firmware to OR30G6 30/06/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-102/103Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to PX-045.
Change printer model name to XP-100.
Change firmware to RT07C6 07/06/2012 in service mode.
Change firmware to RT07C6 07/06/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-200Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RF10D4 10/04/2013 in service mode.
Change firmware to RF01G4 01/04/2016 in service mode.
Change firmware to RF10D4 10/04/2013 in normal mode.
Change firmware to RF01G4 01/04/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-201/204/208Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RD04C4 04/04/2012 in service mode.
Change firmware to RD13CC 13/12/2012 in service mode.
Change firmware to RD04C4 04/04/2012 in normal mode.
Change firmware to RD13CC 13/12/2012 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-210Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OF08D4 08/04/2013 in service mode.
Change firmware to OF08D4 08/04/2013 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L1110Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-5623Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GM22E4 22/04/2014 in service mode.
Change firmware to GM18G3 18/03/2016 in service mode.
Change firmware to GM09GC 09/12/2016 with disabled ink cartridges in service mode.
XP-212/213Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OD13D2 13/02/2013 in service mode.
Change firmware to OD04EC 04/12/2014 in service mode.
Change firmware to OD13D2 13/02/2013 in normal mode.
Change firmware to OD04EC 04/12/2014 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-225Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to UF18F3 18/03/2015 in service mode.
NX125/NX127Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
XP-240/241Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to MF07I3 07/03/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-311Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OJ15D4 15/04/2013 in service mode.
XP-320Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to SJ16F7 16/07/2015 in service mode.
Change firmware to SJ07G4 07/04/2016 in service mode.
WF-4640Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GG18G3 18/03/2016 in service mode.
Change firmware to GG09GC 09/12/2016 with disabled ink cartridges in service mode.
XP-330Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to JO23H6 23/06/2017 with disabled ink cartridges in service mode.
Change firmware to JO08I5 08/05/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
L3158Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-C5790BARead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
XP-342/343/345Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to JU16H6 16/06/2017 with disabled ink cartridges in service mode.
Change firmware to JU23I2 23/02/2018 for fixing recovery problems in service mode.
Change firmware to JU16H6 16/06/2017 with disabled ink cartridges in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-4740Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
XP-402/403/405/406Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to UM30C3 30/03/2012 in service mode.
G2000 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
ET-7750Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
XP-411Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OM01D2 01/02/2013 in service mode.
Change firmware to OM28G1 28/01/2016 in service mode.
Change firmware to OM26I6 26/06/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
XP-420Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SM16F7 16/07/2015 in service mode.
Change firmware to SM07G4 07/04/2016 in service mode.
XP-424Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to SM16F7 16/07/2015 in service mode.
Change firmware to SM07G4 07/04/2016 in service mode.
XP-640/641/645Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NK10G8 10/08/2016 in service mode.
Change firmware to NK08I5 08/05/2018 for fixing recovery problems in service mode.
Change firmware to NK10G8 10/08/2016 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PX-048ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to FO01G3 01/03/2016 in service mode.
L495Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RX14I9 14/09/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
XP-422/423/425Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to UM01E8 01/08/2014 in service mode.
Change firmware to UM02E9 02/09/2014 in service mode.
ME-100Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-430Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to MO10G3 10/03/2016 in service mode.
Change firmware to MO22G6 22/06/2016 in service mode.
TX102Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
B510DNRead printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set AID mode (A).
Set AID mode (B).
Set AID mode OFF.
XP-431Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to MO10G3 10/03/2016 in service mode.
Change firmware to MO22G6 22/06/2016 in service mode.
EP-901ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
XP-434Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to MO10G3 10/03/2016 in service mode.
Change firmware to MO22G6 22/06/2016 in service mode.
XP-432/435Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Clean printhead.
Run charging routine.
Change firmware to ME22G6 22/06/2016 in service mode.
WF-2860Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LQ17iA 17/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
XP-442/445Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to RO02GC 02/12/2016 in service mode.
Change firmware to RO02GC 02/12/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-255/257Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-4630Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GM22E4 22/04/2014 in service mode.
Change firmware to GM18G3 18/03/2016 in service mode.
Change firmware to GM09GC 09/12/2016 with disabled ink cartridges in service mode.
XP-452/455Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
L222Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-530Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NR18G3 18/03/2016 in service mode.
XP-600/601/605Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to MA09D5 09/05/2013 in service mode.
Change firmware to MA22G4 22/04/2016 with disabled ink cartridges in service mode.
Change firmware to MA22G4 22/04/2016 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
XP-700Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to MB09D5 09/05/2013 in service mode.
Change firmware to MB28E8 28/08/2014 in service mode.
Change firmware to MB22G4 22/04/2016 in service mode.
TX123Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
XP-800Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to MB09D5 09/05/2013 in service mode.
Change firmware to MB28E8 28/08/2014 in service mode.
Change firmware to MB22G4 22/04/2016 in service mode.
XP-802Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Enter printer inspection mode.
Leave printer inspection mode.
Change firmware to MB09D5 09/05/2013 in service mode.
Change firmware to MB28E8 28/08/2014 in service mode.
Change firmware to MB22G4 22/04/2016 in service mode.
EP-903ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Change firmware to BJ03G6 03/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-721Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to YD26E9 26/09/2014 in service mode.
Change firmware to YD07F8 07/08/2015 in service mode.
XP-820Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to YD26E9 26/09/2014 in service mode.
Change firmware to YD07F8 07/08/2015 in service mode.
XP-821Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to YD26E9 26/09/2014 in service mode.
Change firmware to YD07F8 07/08/2015 in service mode.
WP-4025Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4011.
Change printer model name to WP-4015.
Change printer model name to WP-4020.
Change printer model name to WP-4025.
Change firmware to HA17E2 17/02/2014 in normal mode.
Change firmware to HA05G2 05/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-830Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to NP18F8 18/08/2015 in service mode.
Change firmware to NP18G3 18/03/2016 in service mode.
Change firmware to NP08I5 08/05/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
L385Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
XP-750Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to MG09D5 09/05/2013 in service mode.
XP-860Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to YA20E6 20/06/2014 in service mode.
Change firmware to YA04G2 04/02/2016 in service mode.
ET-2750Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-7015Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-7010.
Change printer model name to WP-7011.
Change printer model name to WP-7012.
Change printer model name to WP-7015.
Change printer model name to WP-7018.
Change firmware to MS22D3 22/03/2013 in service mode.
Change firmware to MS24D9 24/09/2013 in service mode.
Change firmware to MS19G2 19/02/2016 in service mode.
Change firmware to MS22D3 22/03/2013 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
XP-5100Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LR17iA 17/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
XP-5105Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to LR17iA 17/10/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
XP-6000Change firmware to NU06I7 06/07/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
XP-8500Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME-10Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME-101Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME-401Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-4022Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4011.
Change printer model name to WP-4015.
Change printer model name to WP-4020.
Change printer model name to WP-4025.
Change firmware to HA17E2 17/02/2014 in normal mode.
Change firmware to HA05G2 05/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WP-4023Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-4011.
Change printer model name to WP-4015.
Change printer model name to WP-4020.
Change printer model name to WP-4025.
Change firmware to HA17E2 17/02/2014 in normal mode.
Change firmware to HA05G2 05/02/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-5710Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
WP-4092Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
MG5200 SeriesRead printer waste ink counter(s).
Read diagnostic report from the printer.
WP-4095Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
ME-320Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
L455Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to JR03EA 03/10/2014 in service mode.
WP-4592Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to GP15G1 15/01/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
PX-437ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to SJ16F7 16/07/2015 in service mode.
Change firmware to SJ07G4 07/04/2016 in service mode.
TX130/NX130Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Enable limited chipless mode.
Cancel limited chipless mode.
WP-4595Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to GP15G1 15/01/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WP-M4011Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-M4095Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
PX-105Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WP-M4595Read printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
EW-M970A3TChange firmware to PS20I3 20/03/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L3150Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-2510/2511/2518Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to LB18G3 18/03/2016 in service mode.
WF-2520/2521/2528Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to LC05DC 05/12/2013 in service mode.
Change firmware to LC11D1 11/01/2013 in service mode.
WF-2530/2531/2538Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to LD11CC 11/12/2012 in service mode.
Change firmware to LD05DC 05/12/2013 in service mode.
WF-2532Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change firmware to LD11CC 11/12/2012 in service mode.
Change firmware to LD05DC 05/12/2013 in service mode.
WF-2650/2651Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to DP20G1 20/01/2016 in service mode.
Change firmware to DP06H1 06/01/2017 with disabled ink cartridges in service mode.
WF-2660/2661Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to DQ13G5 13/05/2016 in service mode.
Change firmware to DQ02I2 02/02/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WF-3012Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
WF-3510/3511Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
WF-3530/3531Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to ZH.
Set localization settings to RU.
Set localization settings to EN.
Change printer model name to WP-3520/3521.
Change printer model name to WP-3530/3531.
Reset the platen pad counter.
Change firmware to CG29CA 29/10/2012 in service mode.
PX-S7050Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset Paper Feed Counter.
Change firmware to HD07GA 07/10/2016 in normal mode.
Change firmware to HD10G6 10/06/2016 with disabled ink cartridges in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-3540/3541Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to CJ28C9 28/09/2012 in service mode.
Change firmware to CJ26G2 26/02/2016 with disabled ink cartridges in service mode.
WF-7720Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to FA27HC 27/12/2017 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-3620/3621Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to CC30FA 30/10/2015 in service mode.
Change firmware to CC20GC 20/12/2016 with disabled ink cartridges in service mode.
ET-2550Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to BM25G2 25/02/2016 in service mode.
Change firmware to BM20G4 20/04/2016 in service mode.
WF-3640/3641Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
Change firmware to CB11G3 11/03/2016 in service mode.
Change firmware to CB20GC 20/12/2016 with disabled ink cartridges in service mode.
Change firmware to CB13I7 13/07/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WF-3720Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to CL26H9 26/09/2017 in service mode.
Change firmware to CL08I5 08/05/2018 for fixing recovery problems in service mode.
Change firmware to CL26H9 26/09/2017 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-7012Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change printer model name to WP-7010.
Change printer model name to WP-7011.
Change printer model name to WP-7012.
Change printer model name to WP-7015.
Change printer model name to WP-7018.
Change firmware to MS22D3 22/03/2013 in service mode.
Change firmware to MS24D9 24/09/2013 in service mode.
Change firmware to MS19G2 19/02/2016 in service mode.
Change firmware to MS22D3 22/03/2013 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-3723Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to CL26H9 26/09/2017 in service mode.
Change firmware to CL08I5 08/05/2018 for fixing recovery problems in service mode.
Change firmware to CL26H9 26/09/2017 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
EW-M670FTChange firmware to LU20I2 02/02/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-3725Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to CL26H9 26/09/2017 in service mode.
Change firmware to CL08I5 08/05/2018 for fixing recovery problems in service mode.
Change firmware to CL26H9 26/09/2017 in normal mode.
Firmware for fixing recovery mode must be enabled in the settings.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L396Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-4720Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
WF-4730Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset the platen pad counter.
WF-5110Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GS09GC 09/12/2016 in service mode.
Change firmware to GS09GC 09/12/2016 with disabled ink cartridges in service mode.
WF-7611Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Set localization settings to EURO.
Set localization settings to ASIA.
Set localization settings to WEST.
Reset the platen pad counter.
Change firmware to AD22E4 22/04/2014 in service mode.
Change firmware to AD01E8 01/08/2014 in service mode.
Change firmware to AD26F5 26/05/2015 in service mode.
Change firmware to AD10G2 10/02/2016 in service mode.
Change firmware to AD24G6 24/06/2016 in service mode.
Change firmware to AD21G7 21/07/2016 with disabled ink cartridges in service mode.
Change firmware to AD09I2 09/02/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WF-5190Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GL09GC 09/12/2016 in service mode.
Change firmware to GL09GC 09/12/2016 with disabled ink cartridges in service mode.
Change firmware to GL09GC 09/12/2016 in normal mode.
Change firmware to GL09GC 09/12/2016 with disabled ink cartridges in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
L358Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to XD18E8 18/08/2014 in service mode.
WF-5620Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GM22E4 22/04/2014 in service mode.
Change firmware to GM18G3 18/03/2016 in service mode.
Change firmware to GM09GC 09/12/2016 with disabled ink cartridges in service mode.
WF-5621Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GM22E4 22/04/2014 in service mode.
Change firmware to GM18G3 18/03/2016 in service mode.
Change firmware to GM09GC 09/12/2016 with disabled ink cartridges in service mode.
WF-5690Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Change firmware to GC07G4 07/04/2016 (EUROPE) in service mode.
Change firmware to GC07G4 07/04/2016 (EUROPE) in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-5210Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
WF-5290Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
L555Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to XF27C9 27/09/2012 in service mode.
Change firmware to XF21E8 21/08/2014 in service mode.
Change firmware to XF19I1 19/01/2018 for fixing recovery problems in service mode.
Firmware for fixing recovery mode must be enabled in the settings.
WF-C5290Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
WF-5790Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
WF-C5790Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
K201Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Different drop size test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
WF-6090Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset Paper Feed Counter.
Change firmware to DG15G4 15/04/2016 in normal mode.
Change firmware to DG31GA 31/10/2016 with disabled ink cartridges in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
ET-3600Read printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printhead identifier.
Read/Write printer EEPROM settings.
Change firmware to OL29G6 29/06/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
EP-709ARead printer waste ink counter(s).
Reset printer waste ink counter(s).
Read printer status and ink levels.
Change firmware to NJ23I2 23/02/2018 in service mode.
Change firmware to NJ23I2 23/02/2018 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-6530Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset Paper Feed Counter.
Change firmware to DF15G4 15/04/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-6590Read printer status and ink levels.
Read diagnostic report from the printer.
Clean printhead.
Run charging routine.
Paper pass test.
Paper feed test.
Nozzle test.
Read/Write printer serial number.
Read/Write printer EEPROM settings.
Reset Paper Feed Counter.
Change firmware to DE15G4 15/04/2016 in normal mode.
Firmware update in normal mode is impossible if printer has errors or empty cartridges, busy, connected via network.
WF-6593